三分PK拾

当前位置:三分PK拾-三分PK拾 > 三分PK拾

通风管道与附件的装置的特点

发布人:http://www.xoombulbs.com   发布时间:2017-08-29 16:53:44

1、 在第一道密闭阀门至工程口部的管道与配件,应选用厚2~3mm的钢板焊接制造.其焊缝应饱满、均匀、紧密.

三分PK拾1, in the first closed valve to the Engineering Department of the pipe and fittings, should be used thick 2~3mm steel plate welding, welding seam should be full, uniform, tight

2、染毒区的通风管道应选用焊接衔接.通风管道与密闭阀门应选用带密封槽的法兰衔接,其触摸应平坦;法兰垫圈应选用整圈无接口橡胶密封圈.

2. The ventilation duct in the contaminated area shall be welded and connected. The ventilation pipe and the sealed valve shall be connected with flanges with sealing grooves. The touch shall be flat. The flange gasket shall be made of a whole circle without interface rubber sealing ring

QQ截图20170428145456.png

3、 主体工程内通风管与配件的钢板厚度应契合规划请求.

三分PK拾3. The thickness of the steel plate of the ventilation pipe and fittings in the main project shall be consistent with the plan request

当规划无具体请求时.钢板厚度应大于0.75mm.

When planning has no specific request, the steel plate thickness should be greater than 0.75mm.

三分PK拾4、 工程测压管在防护密闭门外的一端应设有向下的弯头;

4. The engineering pressure measuring pipe shall be provided with a downward elbow at one end of the protective airtight door;

另一端宜设在通风机房或控制室.并应装置球阀.经过防毒通道的测压管,其接口应选用焊接.

The other end shall be located in the ventilation room or the control room, and the ball valve shall be installed

5、 通风管的测定孔、洗消取样管应与管一起制造.测定孔和洗消取样管应封堵.

三分PK拾5. The measuring hole of the vent pipe and the decontamination sampling tube shall be fabricated together with the tube. The measuring hole and the decontamination sampling tube shall be sealed

6、 通风管内气流方向、阀门启闭方向及开启度,应标明明晰、精确.

三分PK拾6, ventilation pipe airflow direction, valve opening and closing direction and opening degree should be marked clear and accurate

本文由山东通风管道整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.xoombulbs.com/我们会有更多精彩内容等你查看。

This article is arranged and released by Shandong ventilation pipe. Do you know something about it? Please click on http://www.xoombulbs.com/ for more content. We will have more wonderful content for you to check.


上一篇:黑白铁的加工也在随着迅速的发展
下一篇:黑白铁加工在厨房设备上的制造的使用三分PK拾

网站三分PK拾 关于我们 产品展示 三分PK拾 工程案例 在线留言 联系我们

澳洲幸运5登陆 极速快乐十分 一分时时彩 天津11选5基本走势 飞速时时彩 天津11选5 大发彩票计划软件 天津11选5基本走势 天津11选5基本走势 快3走势图